Hello again! Today is going to be a fun day. We are going to be laying out all of our blocks and sewing them together to make our quilt! Fun!!!:)
We have a lot to do so let’s get started.
Take all of your finished blocks to a place in your house that has a large enough floor space to lay out about 70″x80″. Start laying each block down with one block having the stripes go vertically and the next block having the stripes go horizontally.
Woo hoo! We are ready to sew:)!! It is a little tricky to make sure all of these blocks are sewn exactly in the place we have put them. But don’t worry, if you are patient with walking back and forth from your machine to your laid out blocks, you will have no problems at all.
The first thing we have to do is mark the left side of the first block of each row. I like to use clover clips, but you could use stickers, safety pins, or bobby pins. Whatever you have to mark that side of that square is fine. In fact, if you use stickers, you could even write the number of the row. That would be the BEST way:)
Starting on the top #1 row, place the left square on top of the square to the right. Place those squares on top of the next square, and those on top of the next. Keep placing your squares on top of each other until the whole row is in a pile. Take this pile to your sewing area.
- Move the top square to the left of the pile
- Flip the next square over on top of that square like turning the page of a book
- Sew the right edge of these blocks together.
- Open the blocks up and add the next block to the right side of the last block
- As you are sewing, check to make sure the flipped cream pieces are snug together tightly or as I like to say, “kissing” each other. You can feel this with your fingers as you go, or you can pin them if you need to.
- The half pinwheel should have the point 1/4″ up from the edge and look like this:
- Repeat this process until all 10 blocks are sewn together.
- Take your row to the ironing board and press the seams flat and smooth.
Yea! Our first row is done!
Take it back to our layed quilt and lay it in its place and repeat the process for all of the rest rows. Whew! That is a lot of walking back and forth. But believe me, you won’t get lost in your quilt this way.
Now let’s take row #1 and #2 to our sewing machine. Be sure to mark #1 row with an extra clip or sticker to be able to keep them in the right order. Here is why the stickers with the row # written on it would be the best method of marking that left edge.
Just look at this beautiful, magical pinwheel! SWEET!!
Woo hoo!!!! Your quilt is all sewn together and it looks FANTASTIC!!
Don’t forget to post pictures of your fabric and progress on Instagram #pinsandstripesqal I will be giving away a jelly roll to someone who posts a picture from all seven lessons and a picture of themselves with their new quilt by the end of July 2017!!
If any of you are just joining us, you can find the previous lessons here:
- Lesson #1 – Planning
- Lesson #2 – Fabric preparation
- Lesson #3 – Chain Sewing
- Lesson #4 – Stitch and flip
- Lesson #5 – Layout
- Lesson #6 – Borders
- Lesson #7 – Quilting and Binding