Piano Key Border Tutorial- Navajo Code Talkers Quilt

image

This quilt just screamed for a beautiful piano key border.  All of the extra strips looked so pretty and seemed like they wanted to be a part of this quilt as well.  The thing about a piano key border is that it definitely looks best with a pretty mitered corner.  It isnt hard, but there are a few tricks to it.  Here is the way that I made this beautiful Piano Key Border:

  1.  Decide on the width of the border.   You can choose this based upon some of your shorter strip scraps so you waste less fabric.   I decided to cut all of my fabric strips to 5″ in length.
  2. Cut all of the left over or newly cut strips to your desired size.
  3. Once all of the fabrics are cut, then sew them together.  You can chain them 2×2, then 4×4, then 8×8 cutting them apart each time and starting the chaining process again.  Your piano keys will get longer and longer as you go.  Sew 4 lengths that are about 16″ longer than the side you are going to attach it to

    image
    Here is my handy “Cutting Gizmo” that I use for cutting my chain piecing. It works great! 
  4. Press your strips nice and flat as you go.
  5. Sew a stay stitch seam a little less than a 1/4″ from each side to keep the seams from openingimage
  6.  Leaving about an 8″ tail above  and below the quilt, sew the piano border to the quilt.  Start sewing about 3″ down and leave about 3″ at the end.
  7. Turn the quilt over so you can see where you are sewing, and sew the 3″ gap closed. Begin and end at 1/4″ from the quilt edge.
  8. Repeat  for the other sides. Be sure to move the previous border strip out of the way so you do not catch it in your stitching.  It is important to be quite exact on that 1/4″ start and stop at the beginning and ending  of your stitching.
  9. Press the border flat.  With the seams toward the border.
  10. While at the ironing board, straighten the border tails on top of each otherimage
  11. Fold the top strip back on itself at a 45 degree angle.  The edge will match the bottom strip and it will look like a pretty mitered angle.image
  12. Heavily press this fold.  You want a very strong fold mark.  CAREFULLY open the fabric back and pin in place so that it does not move at all.
  13. Gently take your quilt back to the sewing machine and  sew on the fold mark.  Start from the outer edge and end EXACTLY on the 1/4″ stitching line of the quilt.
    image
    Stitch on fold line
    image
    End at 1/4″ seam line

    image
    It should look like this
  14. Open and check to make sure that there are no puckers and it looks the way you like it. Then trim the seam and press it openimage
  15. Repeat this for all of the corners.

There you go!  Now you have a SWEET mitered border:). Yea!

–Tracy

4 thoughts on “Piano Key Border Tutorial- Navajo Code Talkers Quilt

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s